Heating Zones: Top 10 / Bottom 10
PCB Width:50 - 560 mm
Weight: 2120 kg
Dimension: W5900 x D1520 x H1440 mm
Product description: Heller 1936 MK7 SMT Reflow Oven, Heating Zones: Top 10 / Bottom 10, PCB Width:50 - 560 mm, Weight: 2120 kg, Dimension: W5900 x D1520 x H1440 mm
Heller 1936 MK7 SMT Reflow Oven
Heller 1936 MK7 SMT Reflow Oven
The 1936 MK7 from Heller Industries Inc is a Reflow Soldering Equipment with Heating Zone Length 590 mm, Max Pcb Width 558.8 mm.
main feature
A. Multi-temperature zone design, more temperature control points, to meet the requirements of different temperature curves
B. Effectively eliminate voids, the total void area can be controlled below 1%
C. Efficient production capacity, the average production cycle is 30~60 seconds
D. High-efficiency oil-free vacuum pump unit for shortest depressurization time
E. Efficient flux recovery system to prevent flux residues
Highest Yield Reflow Oven!
Lowest Delta T on the board
Lowest Nitrogen & Electrical Usage!
Maintenance Free!
VOID Free Reflow Oven – with Vacuum option
Industry 4.0 Compatibility
Integrated Cpk software at No Charge!
1936 MK7 (Air) | 1936 MK7 (Nitrogen) | |
Power Input (3 Phase) Standard | 480 volts | 480 volts |
Breaker Size | 100 amps @ 480v | 100 amps @ 480v |
kW | 9 - 15 Continuous | 9 - 15 Continuous |
Typical Run Current | 30 - 35 amps @ 480v | 30 - 35 amps @ 480v |
Optional Power Inputs Available | 208/240/380/400/415 VAC | 208/240/380/400/415 VAC |
Frequency | 50/60 Hz | 50/60 Hz |
Sequential Zone Turn On | S | S |
Overall Oven Dimensions | 232" (590cm) L x 60” (152cm) W x 63” (160cm) H | 232" (590cm) L x 60” (152cm) W x 63” (160cm) H |
Typical Net Weight | 6380 lbs. (2900 kg) | 7180 lbs. (3280 kg) |
Typical Shipping Weight | 7875 lbs. (3580 kg) | 8980 lbs. (4080 kg) |
Typical Shipping Dimension | 244” x 73” x 83” | 620 x 185 x 210 cm |
Overall Oven Dimensions | 232" (590cm) L x 60” (152cm) W x 63” (160cm) H | 232" (590cm) L x 60” (152cm) W x 63” (160cm) H |
Height From Floor | 35.5" + 2.0" (90 cm + 5 cm) | 35.5" + 2.0" (90 cm + 5 cm) |
Maximum PCB Width | 22" (55 cm) | 22" (56 cm) |
Space Required Between PCB's | 0.0" (0.0 cm) | 0.0" (0.0 cm) |
Conveyor Length On-Load | 18" (46 cm) * | 3" (7.5 cm) * |
Conveyor Length Off-Load | 18" (46 cm) * | 3" (7.5 cm) * |
Heated Tunnel Length | 135" (343 cm) | 135" (343 cm) |
Process Clearance Above Mesh Belt | 2.3" (5.8 cm) | 2.3" (5.8 cm) |
Mesh Belt Pitch | 0.5" (1.27 cm) | 0.5" (1.27 cm) |
Maximum Conveyor Speed | 74"/Min (188 cm/min.) | 74"/Min (188 cm/min.) |
Height From Floor | 35.5" + 2.0" (90 cm + 5 cm) | 35.5" + 2.0" (90 cm + 5 cm) |
Maximum PCB Width | 22" (55 cm) | 22" (56 cm) |
Space Required Between PCB's | 0.0" (0.0 cm) | 0.0" (0.0 cm) |
Conveyor Length On-Load | 18" (46 cm) * | 3" (7.5 cm) * |
Conveyor Length Off-Load | 18" (46 cm) * | 3" (7.5 cm) * |
Heated Tunnel Length | 135" (343 cm) | 135" (343 cm) |
Process Clearance Above Mesh Belt | 2.3" (5.8 cm) | 2.3" (5.8 cm) |
Mesh Belt Pitch | 0.5" (1.27 cm) | 0.5" (1.27 cm) |
Maximum Conveyor Speed | 74"/Min (188 cm/min.) | 74"/Min (188 cm/min.) |
Conveyor Direction Left to Right | S | S |
Conveyor Direction Right to Left | O | O |
Conveyor Speed Control | Closed Loop | Closed Loop |
Standard | 37.0" + 2.0" (94 cm + 5 cm) | 37.0" + 2.0" (94 cm + 5 cm) |
Height from Floor – Optional | 32.6" +3.9" / -.4" (83 cm + 10 cm / - 1 cm) | 32.6" +3.9" / -.4" (83 cm + 10 cm / - 1 cm) |
Clearance Above & Below Conveyor Pins | 1.15" (2.9 cm) | 1.15" (2.9 cm) |
Length ofPCB Support Pins | .187" (4.75 mm) | .187" (4.75 mm) |
3 mm long support pins | O | O |
Minimum/Maximum Board Width | 2.0" – 22" (5 – 56 cm) | 2.0" - 22" (5 – 56 cm) |
Top & Bottom | 10 | 10 |
Heater Type | Instant response open coil | Instant response open coil |
Heater Material | Nichrome | Nichrome |
Profile Change Time | 5 – 15 minutes | 5 - 15 minutes |
Accuracy of Temperature Controller | + .1C | + .1C |
Cross-Belt Temperature Tolerance | + 2.0C | + 2.0C |
Heater Wattage Per Zone | 6000 w** | 6000 w** |
Temperature Range Standard | 60-350C | 60-350C |
Notes: S = Standard, O = Optional. * A 12" (30 cm) Conveyor extension is an available option ** 380V heater wattage 4800
Specifications continue on reverse.
A continuous program of product improvement may result in changes to specification and performance.
The right is reserved to institute these improvements without notice or liability.
Keywords:
SMT Reflow Oven, Efficient Reflow Oven, Reflow Oven, Max PCB Vacuum Reflow Oven, Nitrogen Reflow Oven, Dual Lane Reflow Oven, Vertical Reflow Oven, Vacuum SMT Reflow Oven, Lead free SMT Reflow Oven, LED Reflow Oven, China reflow Oven, Brand Reflow Oven.
Efficient Technology Co., Ltd provide a full SMT assembly line solutions, including SMT Assembly Line, Pick and place machine, Insert Plug-in machine, SMT Reflow oven, Wave Soldering Machine, SMT Stencil Printer, SMT Inspection machine, SMT Peripheral Equipment, SMT Spare Parts etc any kind SMT machines you may need, please Contact us for more information: Wechat : +86 13714564591, Skype : sales@effsmt.com, Email : sales@effsmt.com
Contact: Jacky
Phone: +8613714564591
E-mail: sales@effsmt.com
Add: No. 4, Yangyong Industrial Zone, Shapu Community, Songgang Street, Baoan District, Shenzhen