Panasonic NPM D3A Pick and Place Machine

Max PCB:L 510 × W 590mm
Placing Speed: 46000CPH
Max Feeder: 68 reels
Weight: 1680kg
Product description: Panasonic NPM D3A Pick and Place Machine, Max PCB:L 510 × W 590mm, Placing Speed: 46000CPH, Max Feeder: 68 reels, Weight: 1680kg, W832×D2652×H1444mm

Panasonic NPM D3A Pick and Place Machine

Adoption of the light-weight 16-nozzle head V3

Improving Placement tact time by simultaneously driving X-/Y-axes and selecting optimal pathways during component recognition operation.
Advancement of head drive unit motion control
Improving placement tact time by further advancing motion control and thereby reducing X-/Z-axis travel time.
Use of new pickup operation algorithm
Improving effective productivity by enhancing pickup algorithm for microchips.

Panasonic NPM D3A Pick and Place Machine

Model ID		NPM-D3A
PCB dimensions (mm) *1	Dual-lane mode	L 50 × W50 ~ L 510 × W 300
	Single-lane mode	L 50 × W50 ~ L 510 × W 590
PCB exchange time	Dual-lane mode	0s* *No 0s when cycle time is 3.6 s or less
	Single-lane mode	3.6s* *When selecting short conveyors
Electric source		3-phase AC 200, 220, 380, 400, 420, 480 V 2.7 kVA
Pneumatic source *2		0.5 MPa, 100 L /min (A.N.R.)
Dimensions (mm) *2		W 832 × D 2 652 3 × H 1 444 4
Mass		1 680 kg (Only for main body : This differs depending on the option configuration.)

Placement head		Lightweight 16-nozzle head V3 (Per head)
		High production mode [ON]	High production mode [OFF]
Max. speed		46 000 cph (0.078 s/ chip)	38 000 cph (0.095 s/ chip)
Placement accuracy (Cpk≧1)		±37 μm/chip	±30 μm / chip (±25 μm / chip *5)
Component dimensions (mm)		0402 chip *6 ~ L 6 × W 6 × T 3	03015 67/0402 chip *6 ~ L 6 × W 6 × T 3
Component supply	Taping	Tape : 4 / 8 / 12 / 16 mm
		Max. 68 (4, 8 mm tape, Small reel)

*1 : Due to a difference in PCB transfer reference, a direct connection with NPM (NM-EJM9B) / NPM-W (NM-EJM2D) /NPM-W2 (NM-EJM7D) dual lane specs cannot be established.
*2 : Only for main body
*3 : Dimension D including feeder cart
*4 : Excluding the monitor, signal tower and ceiling fan cover.
*5 : ±25 μm placement support option. (Under conditions specified by Panasonic)
*6 : The 03015/0402 mm chip requires a specific nozzle/feeder.
*7 : Support for 03015 mm chip placement is optional. (Under conditions specified by Panasonic : Placement accuracy ±30 μm / chip）
* Placement tact time,inspection time and accuracy values may differ slightly depending on conditions
* Please refer to the specification booklet for details.

Keywords:

SMT pick and place machine, Hanwha HM520 Plus Pick and Place Machine, Hanwha DECAN S2 Pick and Place Machine, JUKI RS-1R Chip Mounter, JUKI RX-8 pick and place machine, Yamaha Z-TA-R YSM40R Pick and Place Machine, Hanwha Chip Mounter, JUKI Pick and Place Machine, Yamaha Pick and Place Machine, Panasonic Pick and Place Machine, FUJI Pick and Place Machine, Siemens Pick and Place Machine.