YAMAHA YRP10 SMT Stencil Printer
PCB Max Size:510X510mm
Positioning repeatdbility (±6σ) : ±8 μm Cp≧2.0
Printing accuracy (μ±6σ) : ±16 μm Cpk≧2.0Note
size: L1,640 x W1,840 x H1,525mm (Single-lane standard specification)
Weight:1710Kg
YAMAHA YRP10 SMT Stencil Printer
YAMAHA YRP10 SMT Stencil Printer
Program change squeegee attack angle and speed to an ideal setting to provide optimal printing conditions that match the solder being used.
A stencil vacuum mechanism delivers consistent high accuracy printing with no effects from stencil droop. Also drastically cuts the setup time since no offset entry is needed during back and forth printing movement.
Supports full-on pro-level inspections with a dedicated camera. Feedback from inspection results allow over-printing and stencil cleaning.
Possible to arrange up to 200 pins. In addition to a 5 mm-pitched matrix plate, a 2.5 mm-pitched matrix plate with a higher degree of arrangement freedom is also available as an option.
5mm pitch specification 2.5mm pitch specification
Ultra-high-efficiency support of a variety of production models
Automatic replacement of the stencil and push-up pins. Through a combination with automatic changeovers in the entire line, man-hours and the number of human errors in model changeover have been drastically reduced. Nonstop solder supply with a 12 oz. syringe achieves prolonged, unmanned, nonstop solder printing.
Stencil replacement
Supports multiple stencil sizes
To be performed in parallel with push-up pin replacement
Solder transfer
Solder rolling state is maintained
Prevention of solder dripping from squeegee
Push-up pin exchange
Capable of handling a large PCB (L420 x W420 mm)Note
Two-head simultaneous pickup high-speed pin replacement
Note
The 2.5mm pitch spec handles Max. L420 x W250mm PCBs.
L420 x W420mm size is also available as an option.
Solder supply
Possible to use a 6 oz. syringe and 12 oz. syringe together
Stabilized solder rolling radius
Dual lane fully independent production
Flexible dual lane
Connecting two YRP10s in series enables a fully
independent dual-lane operation. A dual-lane
operation and an automatic changeover feature are
supported at the same time. Addition of a traverse
conveyor flexibly connects the YRP10s to the downstream
equipment.
W330 dual lane
Large PCBs the size of up to L420 × W330 mm can be produced in a dual lane. You can increase the number of PCBs to take and the number of PCBs to be conveyed by the carrier, boosting production efficiency.
M2M link solution
Inspection result feedback
Possible to clean the stencil and correct its position
using inspection result feedback via the link with the SPI.
Solder paste printing analysis
Displays link between fluctuations in solder size and solder paste printing status and allows checking the solder paste printer status when defects or problems occur. Streamline quality improvements and line operating rate.
YAMAHA YRP10 SMT Stencil Printer | |
Applicable PCB | Single lane : L510 x W510mm to L50 x W50mm |
Dual lane : L420 x W330mm to L50 x W50mm | |
Printing heads | 3S head (3S : Swing Single Squeegee) |
Printing accuracy | Positioning repeatdbility (±6σ) : ±8 μm Cp≧2.0 |
Printing accuracy (μ±6σ) : ±16 μm Cpk≧2.0Note | |
Core cycle time (Not include printing) | 6sec |
Applicable stencil size | L750 x W750mm, L736 x W736mm (29″), L750 x W650mm, L650 x W550mm |
L600 x W550mm, L550 x W650mm, L584 x W584mm (23″) | |
Power supply | Single-phase AC 200 to 230V +/-20V |
Air supply source | 0.4MPa or more |
External dimension | L1,640 x W1,840 x H1,525mm (Single-lane standard specification) |
Weight | 0.4MPa or more Printer : Approx. 1,710kg |
Keywords:
SMT Stencil printer, Automatic SMT solder paste printer, SMT printing machine, SMT PCB printer, GKG stencil printer, GKG printer, 600mm Solder paste printer, 1200mm solder paste printer, Solder paste printer, Panasonic SMT Stencil Printer, JUKI Solder Paste Printer, DEK Stencil printer, Semi-Auto SMT stencil printer Manufacturer.
Efficient Technology Co., Ltd provide a full SMT assembly line solutions, including SMT Assembly Line, Pick and place machine, Insert Plug-in machine, SMT Reflow oven, Wave Soldering Machine, SMT Stencil Printer, SMT Inspection machine, SMT Peripheral Equipment, SMT Spare Parts etc any kind SMT machines you may need, please Contact us for more information: Wechat : +86 13714564591, Skype : sales@effsmt.com, Email : sales@effsmt.com
FAQ
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / phone /Wechat online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
Contact: Jacky
Phone: +8613714564591
E-mail: sales@effsmt.com
Add: No. 4, Yangyong Industrial Zone, Shapu Community, Songgang Street, Baoan District, Shenzhen
Jacky