Panasonic Insert Plug-in machine NPM-VF

Panasonic Insert Plug-in machine NPM-VF
Component size Max. L 130 mm x W 35 mm
Height Max. 60 mm
Component weight Max. 200 g
Power requirements: AC220V
weight: about 2590kg
Body size: W1866 * D2332 * H1554mm

Panasonic Insert Plug-in machine NPM-VF

2 (1).jpg

Panasonic Insert Plug-in machine NPM-VF

Panasonic designed the NPM-VF odd-form solution to address increasing global labor costs and manual assembly complexity. The new platform, built from the award-winning NPM Platform, introduces several innovative solutions to reduce labor requirements and cost, while boosting productivity, enhancing versatility, and helping ensure quality through-hole and odd-form component insertions.

Odd-form automation requires more than placement, so the NPM-VF integrates an active, under-board clinch, which traverses the population area. Adopted from Panasonic’s pioneering through-hole technology, the active clinch system can secure various through-hole lead diameters at multiple rotations. Yet, when not required, the clinch doubles as localized board support for snap-in/press-fit components. Panasonic is simplifying odd-form and manual assembly with a solution that helps reduce labor costs, improve quality, and minimize resource challenges.

Body Chuck for gripping large odd-form devices without a pick surface (e.g. power transformers)
Lead Chuck for gripping radial lead through-hole devices (e.g. electrolytic capacitors)
Swing Nozzle for inserting through-hole devices oriented in packaging different than insertion orientation
Reduces labor costs, simplifies complex assembly, and increases production quality
Adapts through-hole technologies like active clinching, lead cutting, and part feeding from Panasonic’s 50+ years of through-hole innovation

1 (1).jpg

Model ID	NPM-VF
Model No.	NM-EJR9A: Standard Conveyor
PCB Dimensions (mm)	L 50 x W 50 ~ L 510 x W 460
PCB Dimensions (mm)	Standard Conveyor: L 50 x W 50 ~ L 510 x W 460 Anvil Conveyor (Option): L 50 x W 50 ~ L 460 x W 400
Max. PCB Mass *	Standard Conveyor & Anvil Conveyor: Up to 3kg [*1]
PCB Thickness	Standard Conveyor & Anvil Conveyor: 0.3 ~ 8 mm
PCB Flow	Standard Conveyor & Anvil Conveyor: Left ← Right / Left → Right (Flow direction is selectable)
Insertion Direction	Standard Conveyor & Anvil Conveyor: 360º (± 180º ) *1 degree unit
Insertion Push Force	Standard Conveyor & Anvil Conveyor: Up to 100 N
PCB Exchange Time	Standard Conveyor: 4.5 s Anvil Conveyor (Option): 5.5 s
Applicable Components	Standard Conveyor & Anvil Conveyor: Max. dimensions : L 130 mm × W 35 mm × H 60 mm • L 150 mm × W 38 mm × H 29 mm Max. component mass : 200g
Electric Source	3-phase AC 200, 220, 380, 400, 420, 480 V 2.7 kVA
Pneumatic Source	0.5 ~ 0.8 MPa, 200 L /min (A.N.R.)
Dimensions (mm)	W 1,866 x D 2,332 x H 1,554 (Main body only) W 2,166 x D 2,332 x H 1,554 (When downstream extension conveyor is connected) Note: Excluding the monitor, signal tower and ceiling fan cover.
Mass	2,590 kg (Only for main body : This differs depending on the option configuration)

*Values such as maximum speed may vary depending on operating conditions.
*Please refer to the ‘‘Specification’’ booklet for details.
[*1]: PCB mass after insertion (including carrier mass)

Keywords:

Hanwha Insert Plug-in machine, JUKI Insert Plug-in machine, Yamaha Insert Plug-in machine, Panasonic Insert Plug-in machine, Hybrid Modular Surface Mounter, Hybrid Placement Machine, Insert Plug-in machine, Offline Insert Plug-in machine, Inline Insert Plug-in machine, Vertical Plug-in machine, Horizontal Plug-in machine, Heterotypic Plug-in machine.